Pneumatic Clean Series

5 Port Solenoid Valve Plug-in Type 10-SQ1000274How to Order for Valves10SQ11315 C612Actuation2 position single(A) (B)4 25 1 3(R1)(P)(R2)2 position double (Latching)(A)(B)425 1 3(R1)(P)(R2)NilWithout manifoldblockManifold block specificationMWith manifoldblockMBWith manifold blockWith built-in backpressure check valve343 position closed center(A) (B)4 25 1 3(R1)(P)(R2)3 position exhaust center(A) (B)4 2· When ordering withmanifolds· When only valvesare required.∗ Lead wire is notincluded.∗ Lead wire is notincluded.For adding stations5 1 3(R1)(P)(R2)53 position pressure center(A)(B)4 25 1 3(R1)(P)(R2)Port plugmounting portNilAB—A portB portSeal type1 Rubber sealFunctionNil Standard (1.0WDC)N Negative COMR External pilot specificationsNote1) Y Low wattage type (0.5WDC)Note 1) Except double (latching) type.Note 2) For specifying two or more functions, entersymbols in alphabetical order.Manual overrideNilNon-locking push type(tool required)Cylinder port sizeC3 For ø3.2 One-touch fittingC4 For ø4 One-touch fittingSide portedC6 For ø6 One-touch fittingM5 M5 threadL3 For ø3.2 One-touch fittingNote)L4 For ø4 One-touch fittingTop portedL6 For ø6 One-touch fittingL5 M5 threadNote) Can be changed to side ported specification.Note) BLocking type (tool required)DirectionalControl ValveNote) Except double (latching) type.Coil voltage5 24VDC6 12VDCNote) Indicator light/surge voltagesuppressor is built-in.255