Pneumatic Clean Series

Free Mount Cylinder 10-CU/11-CU72Auto Switch Specifications(Refer to page 2.1-15 of Best Pneumatics No.w for detailed specifications and auto switches not in the following table.)StyleReed switch2-wireSolid stateswitchsystem3-wiresystemAuto switch part no.D-A93D-F9ND-F9BLoad voltage24VDC28VDC or less24VDC (10 to 28VDC)Load current range5 to 40mA (24VDC)40mA or less5 to 40mAIndicator lightYesYesYesApplicationRelay, PLCIC circuit, Relay, PLC24VDC relay, PLCAuto Switch/Proper Mounting Positions for Stroke End DetectionActuatorD-A93D-F9N/F9BA22(26.5)2.80.5WDimensions in parentheses are for D-F9B.BBore sizeD-A93D-F9BD-F9N(mm) A B W A B W A B W6 29 5.5 -3.5 33.5 10 5 33.5 10 0.510 29 9 -7.5 33.5 13.5 1 33.5 13.5 -3.516 35.5 11 -9.5 40 15.5 -1 40 15.5 -5.520 40.5 14.5 -13 45 19 -4.5 45 19 -925 41 16 -14.5 45.5 20.5 -6 45.5 20.5 -10.5Note1) The negative values in the table indicate that the auto switch is mounted inside the cylinder bodyin case of W and outside in case of B.Note2) In case of 5mm stroke (with 1 pc.) or 10mm stroke (2 pcs.), the switch(es) may not go off or morethan one switch may turn on simultaneously. Set them at 1 to 4mm out of the values in the abovetable.Specific Product PrecautionsBe sure to read before handling.Refer to pages 7 to 16 of Front matter for safety instructions and common precautions for clean series andpages 2 to 7 for common precautions for actuators.CautionqObserve the proper tightening torque in the right table inmounting.MountingAppropriate tightening torqueBore size(mm)Hexagon socketAppropriate tightening torquehead cap bolt sizeNm(mm)ø6, ø10 M3 1.08 ±10%ø16 M4 2.45 ±10%ø20, ø25 M5 5.10 ±10%53