OMRON Sysdrive 3G3HV - Detector Cooling Section
OMRON Sysdrive 3G3HV - Detector Cooling Section
OMRON Sysdrive 3G3HV - Detector Cooling Section
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation Conditions<br />
Cautions and Warnings<br />
!<br />
Caution<br />
Don’t install the Inverter near combustible objects. Otherwise, a fire<br />
may occur.<br />
!<br />
!<br />
!<br />
!<br />
!<br />
!<br />
Caution<br />
Caution<br />
Caution<br />
Caution<br />
WARNING<br />
WARNING<br />
Don’t install the Inverter in a place where it is exposed to dust or rubbish.<br />
Otherwise, a fire may occur.<br />
Prevent any foreign matter from entering into the Inverter. Otherwise,<br />
a fire or equipment trouble may occur.<br />
Provide specified spaces between the Inverter and the control panel<br />
and also between the Inverter and other units. Otherwise, a fire or<br />
equipment trouble may occur.<br />
Don’t apply any strong impact to the Inverter. Otherwise, damage to<br />
the Inverter or cause equipment trouble may occur.<br />
Install a stopping device for safety purposes. Otherwise, an injury may<br />
occur. (The holding brake is not a stopping device for safety<br />
purposes.)<br />
Install an external emergency stop device so that the power supply<br />
can be turned OFF and operation can be stopped instantaneously in<br />
case of an emergency. Otherwise, an injury may occur.<br />
Direction and Space<br />
• Install the Inverter on a vertical surface so that the characters on the<br />
nameplate are oriented upward.<br />
• When installing the Inverter, always provide the following installation<br />
space to allow normal heat dissipation from the Inverter.<br />
W = 30 mm min.<br />
120 mm min.<br />
Air<br />
Inverter Inverter Inverter<br />
Side<br />
120 mm min.<br />
Air