OMRON Sysdrive 3G3HV - Detector Cooling Section
OMRON Sysdrive 3G3HV - Detector Cooling Section
OMRON Sysdrive 3G3HV - Detector Cooling Section
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Optional<br />
frequency<br />
detection<br />
Overtorque<br />
detection<br />
Timer function<br />
n071<br />
n072<br />
n073<br />
n074<br />
n075<br />
n076<br />
n077<br />
n078<br />
Function No. Name Description Setting<br />
range<br />
Stall prevention<br />
n070<br />
0, 1<br />
Decelerating<br />
stall<br />
prevention<br />
selection<br />
Accelerating<br />
stall<br />
prevention<br />
operation<br />
level<br />
Operating<br />
stall prevention<br />
operation<br />
level<br />
Frequency<br />
detection<br />
level<br />
Overtorque<br />
detection<br />
function<br />
selection<br />
Overtorque<br />
detection<br />
level<br />
Overtorque<br />
detection<br />
time<br />
Timer function<br />
ON<br />
delay time<br />
Timer function<br />
OFF<br />
delay time<br />
0: Inhibits deceleration stall prevention<br />
from functioning.<br />
1: Permits deceleration stall prevention to<br />
function.<br />
Set current level enabling acceleration stall<br />
prevention in 1% units based on rated output<br />
current of Inverter as 100%.<br />
Set current level enabling operation stall<br />
prevention in 1% units based on rated output<br />
current of Inverter as 100%.<br />
Set detecting output frequency in 1-Hz<br />
units.<br />
Valid if multi-function contact output is set<br />
to optional frequency agreement or optional<br />
frequency detection.<br />
0: Inhibits Inverter from detecting overtorque.<br />
1: Inverter will detect overtorque only during<br />
speed agreement and continue running<br />
with warning after detection.<br />
2: Running Inverter will detect overtorque<br />
and continue running with warning after<br />
detection.<br />
3: Inverter will detect overtorque only during<br />
speed agreement and turn OFF<br />
output for safety when overtorque is<br />
detected.<br />
4: Running Inverter will always detect<br />
overtorque and turn OFF output for<br />
safety when overtorque is detected.<br />
Set overtorque detection current in 1%<br />
units based on rated output current of Inverter<br />
as 100%.<br />
Set overtorque detection time in 1-s units.<br />
Overtorque will be detected if current larger<br />
than value set with n075 flows for the<br />
set time or more.<br />
Set time lag between moment timer function<br />
input turns ON and moment timer<br />
function output turns ON.<br />
Valid if multi-function input and multi-function<br />
contact output are set to timer function.<br />
Set time lag between the moment the timer<br />
function input turns OFF and the<br />
moment the timer function output turns<br />
OFF.<br />
Valid if multi-function input and multi-function<br />
contact output are set to timer function.<br />
[1]<br />
30 to<br />
200<br />
[170]<br />
30 to<br />
200<br />
[160]<br />
0.0 to<br />
400.0<br />
[0.0]<br />
0 to 4<br />
[0]<br />
30 to<br />
200<br />
[160]<br />
0.1 to<br />
10.0<br />
[0.1]<br />
0.0 to<br />
25.5<br />
[0.0]<br />
0.0 to<br />
25.5<br />
[0.0]<br />
User<br />
setting