OMRON Sysdrive 3G3HV - Detector Cooling Section
OMRON Sysdrive 3G3HV - Detector Cooling Section
OMRON Sysdrive 3G3HV - Detector Cooling Section
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• Do not mount the front cover with the Digital Operator attached to the<br />
front cover, otherwise Digital Operator may malfunction due to<br />
imperfect contact.<br />
• Insert the tab of the upper part of the front cover into the groove of the<br />
Inverter and press the lower part of the front cover onto the Inverter<br />
until the front cover snaps shut.<br />
Attaching the Digital Operator<br />
• Hook the Digital Operator on clicks A of the front cover in the arrow 1<br />
direction as shown in the following illustration.<br />
• Press the Digital Operator in the arrow 2 direction until it snaps shut<br />
with clicks B.<br />
Clicks A<br />
Clicks B<br />
Note Do not remove or attach the Digital Operator or mount or remove the front cover using<br />
methods other than those mentioned above, otherwise the Inverter may malfunction due<br />
to imperfect contact or break.<br />
Removing the Front Cover of the Inverter with 18.5-kW Output or<br />
More<br />
• The front cover can be removed without removing the Digital Operator<br />
from the Inverter provided that the Inverter is a model with an output of<br />
18.5 kW or more.<br />
• Loosen the four screws of the front cover and move the front cover<br />
slightly upwards to remove the front cover.
Change language