OMRON Sysdrive 3G3HV - Detector Cooling Section

Function No. Name Description Setting
range
Default
setting
Digital Operator
function
selection
n007 Operation
direction
selection
key permit/
inhibit
0: Inhibits Operation Mode Selection Key
from functioning.
1: Permits Operation Mode Selection Key
to function.
0, 1 1
V/f pattern
selection
V/f pattern
selection
n008
n009
n010
n011
n012
n013
n014
n015
n016
n017
n018
Stop Key
function
selection
Frequency
reference
setting
selection
V/f pattern
selection
Rated input
voltage of
motor
(see note)
Maximum
frequency
(FMAX)
Maximum
voltage
(VMAX)
(see note)
Maximum
voltage frequency
(FA)
Intermediate
output
frequency
(FB)
Intermediate
output
frequency
voltage
(VC)
(see note)
Minimum
output frequency
(FMIN)
Minimum
output frequency
voltage
(VMIN)
(see note)
0: The STOP/RESET Key will function
only when the Inverter is running with
the run command through the Digital
Operator.
1: The STOP/RESET Key will function
anytime.
0: Permits frequency reference set with
the Digital Operator to be valid without
Enter Key input.
1: Permits frequency reference set with
the Digital Operator to be valid with Enter
Key input.
0to E: Selects from 15 fixed V/f patterns.
F: Selects optional V/f pattern with n012
to n018 settings.
Set rated input voltage of motor with 1 V
units.
Voltage
(V)
Frequency
(Hz)
The V/f pattern will be a straight line if
there is no difference between n015 and
n017 in set value, in which case the set
value of n016 will be ignored.
0, 1 1
0, 1 1
0 to F 1
150.0
to
255.0
50.0 to
400.0
0.1 to
255.0
0.2 to
400.0
0.1 to
399.9
0.1 to
255.0
0.1 to
10.0
0.1 to
50.0
200.0
60.0
200.0
60.0
3.0
15.0
1.5
10.0