OMRON Sysdrive 3G3HV - Detector Cooling Section

Note The V/f pattern will be a straight line if there is no difference between n015 and n017 in set
value, in which case the set value of n016 will be ignored.
n019 Acceleration Time 1
Setting range 0.0 to 3,600 Unit s Default setting
10.0
n020 Deceleration Time 1
Setting range 0.0 to 3,600 Unit s Default setting
10.0
n021 Acceleration Time 2
Setting range 0.0 to 3,600 Unit s Default setting
10.0
n022 Deceleration Time 2
Setting range 0.0 to 3,600 Unit s Default setting
10.0
Set Values
• Acceleration time:
• Deceleration time:
• Acceleration time and deceleration time can be set with n019 to n022.
• The acceleration/deceleration time switching command must be selected
to use acceleration time 2 and deceleration time 2. Refer below,
Multi-function Inputs (n035 to n039) for details.
The time required for the output frequency to be 100% from 0% of the
maximum frequency.
The time required for the output frequency to be 0% from 100% of the
maximum frequency.
• Acceleration time 2 and deceleration time 2 will be available if the acceleration/deceleration
time switching command is set.
n023
S-shaped Characteristic Time Selection
Setting range 0, 1, 2, and 3 Unit --- Default setting
1
• The shock of the mechanical system resulting the moment the mechanical
system starts or stops can be reduced with the S-shaped acceleration
and deceleration.
Set Values
Set
value
0 No s-shaped characteristic time
1 S-shaped characteristic time: 0.2 s
2 S-shaped characteristic time: 0.5 s
3 S-shaped characteristic time: 1.0 s
Description