OMRON Sysdrive 3G3HV - Detector Cooling Section

n027 Frequency Reference 3
Setting range
0 to maximum
frequency
Unit Set with n024 Default setting
0.0
n028 Frequency Reference 4
Setting range
0 to maximum
frequency
Unit Set with n024 Default setting
The inching frequency reference must be set with n029 if an inching frequency is required.
The inching command must be selected to use the inching frequency reference. Refer
below, Multi-function Input Selection (n035 to n039) for details.
0.0
n029
Setting range
Inching Frequency Reference
0 to maximum
frequency
Unit Set with n024 Default setting
6.0
Acceleration/Deceleration Time Selection (n019 to n022)
Acceleration time and deceleration time can be set with n019 to n022.
The acceleration/deceleration time switching command must be selected to use acceleration
time 2 and deceleration time 2. Refer below, Multi-function Input Selection (n035
to n039) for details.
n019 Acceleration Time 1
Setting range 0.0 to 3,600 Unit s Default setting
n020 Deceleration Time 1
Setting range 0.0 to 3,600 Unit s Default setting
n021 Acceleration Time 2
Setting range 0.0 to 3,600 Unit s Default setting
10.0
10.0
10.0
n022 Deceleration Time 2
Setting range 0.0 to 3,600 Unit s Default setting
Set Values
Acceleration time: The time required for the output frequency to be 100% from 0% of the
maximum frequency.
Deceleration time: The time required for the output frequency to be 0% from 100% of the
maximum frequency.
Acceleration time 2 and deceleration time 2 is available if the acceleration/deceleration
time switching command is set.
Motor Rotation Direction Selection (n005 and n006)
Set the rotation direction of the motor with n005 so that the motor will rotate in the set direction
when the forward rotation command is input.
10.0