OMRON Sysdrive 3G3HV - Detector Cooling Section

List of Parameters
Group 1: n001 to n034
Function No. Name Description Setting
range
Parameter n001
0 to 7 1
group
selection
Parameter
initialization
Operation
mode
selection
Input voltage
selection
Interruption
mode
selection
Motor rotation
direction
selection
n002
n003
n004
n005
n006
Parameter
write prohibit
selection/Parameter
initialization
Operation
mode
selection
Input voltage
selection
(see note)
Interruption
mode
selection
Forward/
Reverse
rotation
selection
Reverse
rotation-inhibit
selection
0: The parameters n001 can be set and
checked and the parameters n002 to
n108 can be only checked.
The speed and direction of the Digital
Operator can be set.)
1: The parameters of group 1 (i.e., n001
to n034) can be set and checked and
the parameters of groups 2 and 3 (i.e.,
n035 to n049 and n050 to n108) can be
only checked.
2: The parameters of groups 1 and 2 can
be set and checked and the parameters
of group 3 can only be checked.
3: The parameters of groups 1, 2, and 3
can be set and checked.
Default
setting
6: All parameters will be set to default-set
values.
7: All parameters will be initialized with a
three-wire sequence.
Selects method to input run command and 0 to 3 3
frequency reference.
Run command Frequency reference
0: Digital Operator Digital Operator
1: Control circuit terminals Digital Operator
2: Digital Operator Control circuit terminals
3: Control circuit terminals Control circuit terminals
Set Inverter input voltage in 1-V units. 150.0 200.0
to
255.0
0: Deceleration stop
1: Free running stop
2: Free running stop 1 with timer. The run
command during deceleration time 1 or
2 will be ignored.
3: Free running stop 2 with timer. The
constant run command is valid. The
motor will start running after deceleration
time 1 or 2 passes.
0: When the forward rotation command is
input, the motor seen from the load
side rotates counterclockwise.
1: When the forward rotation command is
input, the motor seen from the load
side rotates clockwise.
0: The motor can rotate in reverse.
1: The motor cannot rotate in reverse.
0 to 3 0
0, 1 0
0, 1 0
Note With 400-V Inverters, the setting range upper limits and default settings are double those
shown in the table.