OMRON Sysdrive 3G3HV - Detector Cooling Section

Function
No.
n095
n096
n097
n098
n099
n100
n101
n102
Name
Energysaving
control
Energysaving
control
selection
Energysaving
coefficient
K2
Energysaving
voltage
lower
limit for 60
Hz
Energysaving
voltage
lower
limit for 6
Hz
Mean power
time
Search
control voltage
limit
Search
control voltage
step
when 100%
Search
control voltage
step
when 5%
Description
0: Inhibits the Inverter from performing
energy-saving control.
1: Permits the Inverter to perform energysaving
control.
Set coefficient so that maximum motor efficiency
will be obtained.
Set lower limits of energy-saving control
output voltage in 1% units at 6 Hz and
60 Hz based on motor rated voltage set
with n011 as 100%, in which case, lower
limit of energy-saving g control output voltage
will be on a straight line linking values
set with n097 and n098 if energy-saving
control output frequency is between 6 and
60 Hz.
Set time to calculate mean output power
of Inverter performing energy-saving control.
Time (ms) = 25 x n099
Set range of variable voltage in 1% units
to be used by Inverter in search control
mode based on rated motor input voltage
as 100%.
Search operation function will be invalid if
n101 is set to 0.
Set range of variable voltage in 1% units
to be used by Inverter in search control
mode with 100% search operation start
voltage based on rated motor input voltage
as 100%.
Set range of variable voltage in 1% units
to be used by Inverter in search control
mode with 5% search operation start voltage
based on rated motor input voltage as
100%.
Setting
range
0, 1 0
0.00 to
655.0
0 to
120
Default
setting
See
note
50
0 to 25 12
1 to
200
0 to
100
0.0 to
10.0
0.0 to
10.0
Not used n103 Not used Do not change setting. 1 1
n104 Not used Do not change setting. 1 1
n105 Not used Do not change setting. 0 0
n106 Not used Do not change setting. 0 0
n107 Not used Do not change setting. 2 2
n108 Not used Do not change setting. 1 1
Note Default settings vary with the Inverter model.
1
0
0.5
0.2