OMRON Sysdrive 3G3HV - Detector Cooling Section
OMRON Sysdrive 3G3HV - Detector Cooling Section
OMRON Sysdrive 3G3HV - Detector Cooling Section
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Wiring<br />
Cautions and Warnings<br />
!<br />
WARNING Be sure that the power supply is turned OFF before wiring. Otherwise, an<br />
electric shock may occur.<br />
!<br />
WARNING Wiring must be performed by authorized persons specialized in electrical<br />
work. Otherwise, an electric shock or fire may occur.<br />
!<br />
WARNING Be sure to check for proper operation after wiring the emergency stop circuit.<br />
Otherwise, physical injury may occur.<br />
!<br />
WARNING Be sure to ground the ground terminal. Otherwise, an electric shock or fire<br />
may occur.<br />
!<br />
WARNING Be sure to confirm that the rated voltage of the Inverter coincides with the<br />
voltage of the AC power supply. Otherwise, a fire, injury, or equipment<br />
trouble may occur.<br />
!<br />
WARNING When connecting the dynamic braking resistor, Dynamic Braking Resistor<br />
Unit, or Braking Unit, be sure to follow the instructions specified in the Operation<br />
Manual. Otherwise, a fire may occur.<br />
!<br />
!<br />
WARNING Be sure to wire correctly. Otherwise, injury or equipment damage may occur.<br />
WARNING Be sure to firmly tighten the screws on the terminal block. Otherwise, a fire,<br />
injury, or equipment damage may occur.<br />
!<br />
Caution<br />
Don’t connect the AC power to the output terminal T1 (U), T2 (V), or T3 (W).<br />
Otherwise, equipment damage or trouble may occur.