OMRON Sysdrive 3G3HV - Detector Cooling Section

Set the rotation direction of the motor with n006 so that the motor will rotate in the set direction
when the reverse rotation command is input or set n006 so that the reverse rotation
command will be ignored.
n005
Forward/Reverse Rotation Selection
Setting range 0, 1 Unit --- Default setting
0
Set Values
Set
Description
value
0 The motor seen from the load side rotates counterclockwise.
1 The motor seen from the load side rotates clockwise.
n006
Reverse Rotation-inhibit Selection
Setting range 0, 1 Unit --- Default setting
0
Set Values
Set
value
0 The motor can rotate reversely.
1 The motor cannot rotate reversely.
Description
Multi-function Input Selection (n035 to n039)
Set n035 to n039 so that the Inverter can use multi-function input terminals 2 to 6 to perform
the following.
Three-wire sequential operation
Multi-step operation
Inching operation
Operation using acceleration time 2 and deceleration time 2
Refer to Section 3–5–3 List of Parameters for details.
n035
Multi-function Input 1 (S2)
Setting range 0 to 24 Unit --- Default setting
n036
Multi-function Input 2 (S3)
Setting range 2 to 24 Unit --- Default setting
n037
Multi-function Input 3 (S4)
Setting range 2 to 24 Unit --- Default setting
n038
Multi-function Input 4 (S5)
Setting range 2 to 24 Unit --- Default setting
0
2
4
9