fundamentos para o projeto de componentes de máquinas

87. ZHAO X-L & PACKER JA, Fatigue Design Procedure for Welded Hollow Section
Joints, Woodhead 2000.
88. ANSI/AGMA 2001-B88, Fundamental Rating Factorsand Calculation Methods for Involute
Spur and Helical Gear Teeth, 1988 mandatory if serious design is contemplated.
89. ARRETO, Jr. Consultoria Técnica. Extensometria [online]. Disponível na Internet via
URL: http://www.barretojunior.hpg.com.br/euler/ext_05.htm. Arquivo capturado em
12/04/2001.
90. AS 2938-1993, Gears - Spur and Helical - Guide to Specification and Rating relies on
AGMA.
91. ASM Handbook v20: Materials Selection and Design, ASM 1997
92. BAKER AK, Industrial Brake & Clutch Design, Pentech 1992.
93. BEDFORD A., and FOWLER W., Dynamics, Addison Wesley, Menlo Park, USA, 1999.
94. BEDFORD A., and FOWLER W., Statics, Addison Wesley, Menlo Park, 1999.
95. BRAADFIELD, Terry. Strain Gauges [online]. Disponível na Internet via URL:
http://arapaho.nsuok.edu/~bradfiel/advlab/strain/.
96. Braking of Road Vehicles, IMechE (conf proc) 1976, 1993.
97. BURR AH & CHEATHAM JB, Mechanical Analysis and Design, Prentice Hall 2ed 1995.
98. CABOS DE AÇO – PRÁTICO: Morsing – www.morsing.com.br
99. CABOS DE AÇO PARA PRINCIPIANTES (e leigos e curiosos), Morsing,
www.morsing.com.br
100. CARVALHO, José - Elementos de Máquinas
101. Catálogo Geral NSK
102. Catálogo Geral SKF
103. Catálogos – Dayco, Gates, Goodyear.
104. CIMAF - COMPANHIA INDUSTRIAL E MERCANTIL DE ARTEFATOS DE FERRO,
www.cimaf.com.br.
105. COLBOURNE JR, The Geometry of Involute Gears, Springer-Verlag 1987 rather
theoretical for this course.
106. CONNOR LP ed,Welding Handbook, 5 vols, American Welding Society 1987.
107. CRADDOCK DH, Introduction to Fastening Systems, OUP 1974.
108. CZERNIK DE, Gaskets: Design, Selection & Testing, McGraw-Hill 1996.
109. DEN HARTOG P., Mechanical Vibrations, McGraw-Hill Book Company, 1956.
110. DRAGO RJ, Fundamentals of Gear Design, Butterworths 1988.
111. DRAGO RJ, Fundamentals of Gear Design, Butterworths 1988.
449