Administration Guide - Avaya Support

VMSC - Voice Mail Domain (VMD) Configuration
! Maximum Silence before Hanging Up (ms) Enter the time, in
milliseconds, that the voice mail system waits before hanging up, if a user
falls silent while recording. The range is 0 through 12000, the default is
6000.
! Tone Settings:
— Tone Name Select the hangup tone that you want to configure.
Note: You can populate the list via the Add New Tone button.
— Tone Identifier Enter a unique identifier number for the tone
selected in the Tone Name field. The range is 0 through 999, the
default is 0.
— Tone Length (ms) Enter the time, in milliseconds, a recording can
be allowed to continue after the hangup tone has been detected. The
range is 0 through 9999, the default is 500.
— Add New Tone Click to add a new tone to the Tone Name pick list.
You can add up to 64 tones
The system displays the Add New Tone dialog box. Enter a unique
name for the hangup tone in the Tone Name field and click OK.
Note: You must then configure the settings in the Tone Identifier and
Tone Length (ms) fields.
— Remove Tone Click to remove the tone selected in the Tone Name
field. The system prompts you to confirm your decision before
deleting the tone.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
3–76 MAS Administration Guide
February 2007