Administration Guide - Avaya Support

VMSC - Messaging Application Server (MAS) Configuration
— Inband Request Digit String Enter the sequence of DTMF digits
that the MAS must send to the PBX, when requesting a call
information packet. The range is 0 through 99, and the default is
blank.
— Pause before Request String (ms) Enter the time, in milliseconds,
before the MAS sends the request string to the PBX after going off
hook. The PBX may require this time to stabilize. The range is 0
through 10000, and the default is 500.
! Protocol Settings... Opens the Inband Protocol Settings dialog box,
where you can configure inband protocol types. For more information, see
MAS - PBX Integration - Inband Protocol Settings Dialog Box on page 4-44.
! MWI Settings... Opens the MWI Settings dialog box, where you can
configure MWI settings. For more information, see MAS - PBX Integration -
MWI Settings Dialog Box on page 4-47.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
February 2007 MAS Administration Guide
4–43