Administration Guide - Avaya Support

Caller Applications Editor
— Announcement (pick list) You can select or a mailbox
number.
! Enter the number of the subscriber mailbox where the
announcement is located.
Note: If you enter a number which is not already in the pick list, the
Caller Applications Editor prompts you to confirm the
number, when you press OK.
! If the mailbox number is set to , the system does not
allocate the subscriber mailbox number until the caller application
runs. The mailbox number is supplied by an association.
For more information, see Add Association/Association Properties
Dialog Box on page 6-69.
— Announcement (grid)
! This icon adds an new line to the grid.
! Prompt The announcement ID number is system generated and
displayed automatically.
! Comments Enter a brief name or description for the
announcement. This is important, if you are not recording the
prompt right away, as this helps you remember later what the
announcement is to be. Press Enter on your keyboard.
! This icon deletes the announcement selected in the grid.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
6–58 MAS Administration Guide
February 2007