Administration Guide - Avaya Support

VMSC - Voice Mail Domain (VMD) Configuration
PBX Configuration - Outgoing Call Tab (IP H.323)
Use the PBX Configuration dialog box, Outgoing Call tab to configure the properties
of an outgoing call in a voice mail domain.
Launching the Screen
1. In the Voice Mail System Configuration window, click the voice mail
domain (VMD).
2. Double-click PBXs. The system expands the node to show all available
types of PBX.
3. Double-click the IP H.323 PBX. The system displays the PBX
Configuration dialog box for the selected VMD, with the General tab
active.
4. Click the Outgoing Call tab.
Configuring the Screen Controls
! Layer1 Protocol This value defines the Layer 1 protocol used with the
outgoing call. Select one of the following supported values:
— G.711µ-law (mu-law).
— G.711A-law (default).
Note: Ensure that the form of G.711 encoding matches that of the
switch. In general, µ-law (mu-law) is used in North America and
Japan, and A-law is used in Europe. If your choice of encoding
scheme does not match the switch, then audio will sound
garbled.
! BC Transfer Cap This value defines the transfer rate for bearer capability
information. Select one of the following supported values:
— Speech (default)
— Unrestricted Digital Data
— Restricted Digital Data
! Number Type Select the number type designated by the local ISDN
provider. Select one of the following supported values:
— Unknown (default)
— International
— National
Avaya Modular Messaging Release 3.1 with the Avaya MSS
February 2007 MAS Administration Guide
3–109