Administration Guide - Avaya Support

Examples of Caller Applications
Figure B-3.
Building the Application
The following procedure assumes that you have already started the Caller Applications
Editor. It presents a step-by-step method for building the Example 3 caller application.
1. Create the caller application base node. Name it Auto fax attendant.
Provide a brief Description and select the Language. See New Caller
Application Dialog Box on page 6-37.
2. Modify the caller application base node properties. See Properties
Dialog Box on page 6-42.
! Select Menu with extension as the Action type.
! Select Play entry prompt and then select Application prompt
(Prompt tab).
! Add a prompt and enter “Enter extension or fax machine number”
under Comments.
Note: You will not actually record the prompt at this point, you are
merely creating a placeholder for it.
! Verify that the Application tab is set to use the Default operator,
as the Default cancel setting, and the * key as the
Default cancel key.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
B–14 MAS Administration Guide
February 2007