Administration Guide - Avaya Support

VMSC - Voice Mail Domain (VMD) Configuration
PBX Configuration - General Tab (QSIG)
Use the PBX Configuration dialog box, General tab to configure PBX Dual Tone
Multi-Frequency (DTMF) dialing tones.
Launching the Screen
1. In the Voice Mail System Configuration window, click the voice mail
domain (VMD).
2. Double-click PBXs. The system expands the node to show all available
types of PBX.
3. Double-click the QSIG PBX. The system displays the PBX
Configuration dialog box for the selected VMD, with the General tab
active.
Configuring the Screen Controls
! DTMF Inter-Digit Delay during Dialing (ms) Enter the duration, in
milliseconds, between DTMF tones when dialing. The range is 10 through
999, and the default is 80.
! DTMF Length during Dialing (ms) Enter the duration, in milliseconds, of a
DTMF tone when dialing. The range is 10 through 999, and the default is
80.
! DTMF Length during Detection (ms) Enter the length, in milliseconds, of
a DTMF tone during detection. The range is 1 through 999, and the default
is 50.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
3–90 MAS Administration Guide
February 2007