Administration Guide - Avaya Support

VMSC - Voice Mail Domain (VMD) Configuration
! Dialing Rules This displays a list of dialing rules. These are configured in
the Telephony Dialing Rule dialog box. You can configure a dialing rule by
specifying the phone number length of the originating call, the initial
sequence of digits of the originating calling party number, and whether it
should prepend the trunk, long distance or international dialing access
codes.
See Dialing Rules - Telephony Dialing Rule Dialog Box on page 3-121.
— Opens the Telephony Dialing Rule dialog box so that you can
configure a new rule. When you have clicked OK, the system adds a
line to the Dialing Rules list for the new rule.
— Opens the Telephony Dialing Rule dialog box for the rule
currently selected in the Dialing Rules list. You can modify the rule
and click OK to update it.
— Deletes the rule selected in the Dialing Rules list. The system
prompts you to confirm the deletion.
— Number length Displays the phone number length of the originating
call for the dialing rule.
— Starting digits Displays the sequence of digits of the originating
calling party number for the dialing rule.
— Dialing codes Displays the type of dialing access for the dialing
rule. This can be set to:
! None, ‘No dialing codes required’.
! One, for instance, ‘Use trunk access codes’.
! A combination, for instance, ‘Use trunk, long distance and
international access codes’.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
3–120 MAS Administration Guide
February 2007