Administration Guide - Avaya Support

VMSC - Messaging Application Server (MAS) Configuration
MAS - PBX Type Dialog Box
Note: For a detailed overview of Messaging Application Server (MAS) configuration
in the Voice Mail System Configuration (VMSC) application, see Overview
of MAS Configuration in VMSC on page 4-2.
This topic describes how to use the PBX Type dialog box to specify which Private
Branch Exchange (PBX) is used for the selected MAS. You must configure this setting
when you physically change the PBX connected to an MAS, or add an MAS to a voice
mail domain.
Launching the Screen
1. In the Voice Mail System Configuration window, click the voice mail
domain.
2. Click Message Application Servers.
3. Click on the MAS you want to configure.
4. Double-click PBX Type. The system displays the PBX Type dialog box
for the selected MAS, with the General tab active. There is only one tab.
Configuring the Screen Controls
! Telephony Type Select the type of PBX you require. The PBX list is then
updated to show the PBXs available for that type.
! PBXs Click to select the required PBX from those available for the selected
Telephony Type.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
4–58 MAS Administration Guide
February 2007