Administration Guide - Avaya Support

VMSC - Voice Mail Domain (VMD) Configuration
Configuring the Screen Controls
! Fax Enable Select to enable faxing. This check box is cleared by default.
When this check box is selected, the other fields in the tab are enabled.
! MAS Fax Sender Server Enter the name of the MAS that will process
outgoing faxes. If your system has only one MAS, enter the name of that
MAS. If you do not know the name of the MAS, you can use the Browse
button to locate it.
! Fax Mailbox Enter the mailbox number of the mailbox on the messaging
server that is to be used for outgoing faxes.
Note: This number must match the number in the Fax Mailbox
Number field on the Configure Subscriber Management
page of the Avaya MSS.
! Company Fax Number Enter the fax number that callers should use to
send faxes to subscribers on the system. This number appears on any
outgoing fax cover pages.
! Cover Page... Use this button to define company identification that
appears on the cover page. See Fax - Fax Cover Page Dialog Box on page
3-57.
! Advanced... Use this button to define advanced parameters for fax
transmissions. See Fax - Advanced Fax Dialog Box on page 3-58.
! Fax Send Speed Select the speed with which the fax is send, in baud. The
range is 4800 to 14400. The default is 9600.
! Fax Receive Speed Select the speed with which the fax is received, in
baud. The range is 4800 to 14400. The default is 9600.
! Canonical Addressing Select this check box, if your fax servers support
canonical addressing. This enables the Country Code and Area Code
fields and the Access Codes button.
Canonical addressing specifies the full fax telephone number for the
voice mail domain, for use by the telephone user interface. When a
subscriber wants to send a fax, the system prompts for these outgoing
numbers or allows alternative entries as an aid to addressing. The
canonical address also allows the system to prevent unnecessary toll
calls, if the receiver of the fax uses the same country code or area code
as the sender.
The canonical address precedes the subscriber number with the country
code and area code, for example, +1 (408).
If you enable canonical addressing, you must specify a default country
code and area code for this voice mail domain.
— Country Code Enter the code for the country.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
February 2007 MAS Administration Guide
3–55