Administration Guide - Avaya Support

VMSC - Voice Mail Domain (VMD) Configuration
! Complete Transfer Enter the dial string required to complete a transfer.
You can enter up to 50 characters. The default is ^KD for NT M-1, and ^Kk
for G3 switches.
! Retrieve Call Enter the dial string required to drop a transferring call and
reconnect the MAS to the calling party. You can enter up to 50 characters,
and the default is ^KA.
! Drop Call Enter the dial string required to drop a call by emulating the
Release key. You can enter up to 50 characters. The default is ^KR for NT
M-1, and ^Kj for G3 switches.
! Make Call Prefix Enter the dial string required when using an alternate key
for outgoing calls. This setting is used mostly for automatic call distribution
(ACD) integrations, where outgoing calls are made on a different call
appearance than incoming calls. You can enter up to 50 characters, and the
default is blank.
Note: For information on automatic call distribution, see MAS -
Telephony Interface - ACD Tab (Set Emulation) on page 4-20.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
February 2007 MAS Administration Guide
3–101