Administration Guide - Avaya Support

VMSC - Voice Mail Domain (VMD) Configuration
Telephone User Interface - Message Timing Tab
Use the Telephone User Interface dialog box, Message Timing tab to configure
message timing properties for a voice mail domain. You can configure the voice
message playback controls on the telephone keypad, and specify the number of
seconds permitted for recording personalized prompts.
Launching the Screen
1. In the Voice Mail System Configuration window, click the voice mail
domain.
2. Double-click Telephone User Interface. The system displays the
Telephone User Interface dialog box for the selected VMD, with the
General tab active.
3. Click the Message Timing tab.
Configuring the Screen Controls
! Seconds to Rewind Message When Rewind Button Pressed Enter the
amount of time, in seconds, by which subscribers can rewind a voice
message when they press the Rewind key on the keypad. The range is 0
through 99 and the default is 5.
! Seconds to Pause Message When Pause Button Pressed Enter the
amount of time, in seconds, by which a message is paused when a
subscriber presses the Pause key on the keypad while playing or recording
a voice message. The range is 0 through 99 and the default is 5.
! Seconds to Fast Forward Message When Fast Forward Button
Pressed Enter the amount of time, in seconds, by which subscribers can
fast forward a voice message when they press the Fast Forward key on the
keypad. The range is 0 through 99 and the default is 5.
! Maximum Mailbox Prompt Length in Seconds Enter the amount of time,
in seconds, that subscribers are given for recording a mailbox prompt such
as a personal greeting. The range is 1 through 999 and the default is 90.
When using the TUI, subscribers hear a warning message 10 seconds
before the end of the prompt length. To avoid this warning message
playing at the start of a recording it is recommended that you enter at
least a value of 20.
Note: This setting does not apply to the Spoken Name prompt. The
maximum length of the Spoken Name prompt depends on the
audio encoding format selected. For GSM 6.10, it is 20 seconds.
For G.711 µ-law (mu-law), it is 7.5 seconds. For G.711 A-law, it is
7.5 seconds
Avaya Modular Messaging Release 3.1 with the Avaya MSS
February 2007 MAS Administration Guide
3–25