Administration Guide - Avaya Support

VMSC - Messaging Application Server (MAS) Configuration
! Immediate Transfer
If the Show Advanced Call Packet Type check box is selected, you
can also configure these types:
! Auto Logon This is used by Alcatel PBXs to identify the calling
party in a direct internal call. In a regular direct internal call, the
calling party is not identified. With an Auto Logon call, if the
extension of the calling party is identified as a subscriber, the
caller is prompted to enter a password.
! Check Mailbox This is used by Matra PBXs, when an extension
is forwarded to a voice mail port on a ring-no-answer condition, a
busy condition, or on always. It contains the call packet type
(Check Mailbox) followed by the extension number of the
telephone that is forwarded.
! Confirm Mailbox This is sent by Modular Messaging software,
when it receives a Check Mailbox call information packet. It is
required for the forwarding operation to continue.
! Transfer Initiate This is sent by Matra PBXs when an attempt is
made to transfer a call to an extension that has been forwarded to
a voice mail port.
— Packet Length Enter the total length of the selected call information
packet. The range is 0 through 255.
Note: This field is available only if the Fixed Length Packets check
box is selected in the PBX Integration dialog box, Inband tab.
See MAS - PBX Integration - Inband Tab on page 4-40. It is also
not available, if the selected Call Packet Type is Check
Mailbox or Confirm Mailbox.
! Codes for Call Type
— Code 1, 2, 3, 4 A PBX can send up to four different codes for each
call packet type. For example, for a No Answer Extension call, the
PBX may send three different codes: one for an internal call, one for
an external call, and one for an external trunk call.
Note: If the selected Call Packet Type is Check Mailbox or Confirm
Mailbox, only Code 1 is available.
! Field Type Settings Use the fields in this group box to determine the
format of call information packets in the selected call packet type.
Note: This whole group box is not available, if the selected Call Packet
Type is Check Mailbox or Confirm Mailbox.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
February 2007 MAS Administration Guide
4–45