Administration Guide - Avaya Support

VMSC - Messaging Application Server (MAS) Configuration
— Click Name, and enter the domain name of the switch on the
network. For example, pbx.avaya.com.
— Click IP Address, and enter the IP address of the switch on the
network.
! TCP Port Enter the TCP number of the port on the switch that is used to
communicate with the MAS. By default, the TCP number is 5002.
! Notes Enter notes associated with the C-LAN integration. For example,
you may find it useful to enter a description of the switch you are using.
! Maximum Number of Remote Service Sessions Enter the maximum
number of remote MASs that are dependent on the primary server for
integration. The range is 0 through 999, and the default is 0.
! Connect Link This connects the C-LAN link.
Notes:
! This button is only displayed when the link between the MAS
and switch is disconnected.
! If the MAS is unable to establish a connection with the switch, a
link connection down event is logged in the Windows event log.
The source of the error is gv_vserver, and the category is PBX
Integration.
! Disconnect Link This disconnect the C-LAN link.
Note: This button is only displayed when the link between the MAS and
switch is connected.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
4–52 MAS Administration Guide
February 2007