Administration Guide - Avaya Support

VMSC - Messaging Application Server (MAS) Configuration
MAS - PBX Integration - QSIG/SE Tab
Use the PBX Integration dialog box, QSIG/SE tab to configure an MWI port group for
QSIG and Set Emulation Private Branch Exchange (PBX) integration for a Messaging
Application Server (MAS).
Note: After configuring these settings, you must stop and restart the MM
Messaging Application Server service for the settings to take effect. See
Appendix C, Stopping and Restarting Modular Messaging Services.
Launching the Screen
1. In the Voice Mail System Configuration window, click Message
Application Servers.
You may need to expand the tree to see the all the MASs in the voice
mail domain.
2. Click the MAS you want to integrate.
You may need to expand the tree to see the available PBXs
3. Double-click PBX Integration. The system displays the PBX
Integration dialog box for that MAS, with the General tab active.
4. Click the appropriate option button in the Integration Type list:
! QSIG for Q.signaling (QSIG) integration.
! Set Emulation for digital set emulation (DSE) integration.
5. Click the QSIG/SE tab.
Configuring the Screen Controls
! MWI Port Group Select the port group to be used for MWI. The Default
Group is selected by default.
Port groups are created in the Port Groups dialog box. For more
information, see Rules for Creating Port Groups on page 4-24.
! Max MWI Sessions Enter the maximum number of MWI sessions allowed
at one time. The maximum number cannot exceed the maximum number of
ports in the selected port group.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
February 2007 MAS Administration Guide
4–49