Administration Guide - Avaya Support

VMSC - Messaging Application Server (MAS) Configuration
Telephony Configuration Wizard
When you select an MAS in a voice mail domain for the first time, the system prompts
you to run the Telephony Configuration Wizard.
It can also be launched via the Edit > Telephony Configuration Wizard menu or the
right-click menu off the Message Application Servers node.
This wizard enables you to quickly configure the telephony interface, add PBXs,
configure a PBX type, and configure the number of ports or time slots for the MAS.
Telephony Configuration Wizard Screens
If you launch the wizard via the top level Edit menu and the MAS node is not selected,
you are first prompted to enter the appropriate Messaging Application Server name
and click OK.
The wizard is then launched and you can press the Next button to reach each of these
screens:
! Welcome Displays a description of the wizard usage.
! Select the Telephony Interface type You can select the telephony
interface type used by the MAS from the list.
! Select a PBX Type You can select from the list to specify which PBX is
used for the MAS.
Note: If you don’t see the required PBX, click the Add PBX Type button
to launch the Add New PBX dialog box. See Add New PBX Dialog
Box on page 3-68.
! Select the number of ports You can enter the number of ports to be used
by the MAS.
! Finish Displays advice on how to proceed with configuring the MAS.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
February 2007 MAS Administration Guide
4–9