Administration Guide - Avaya Support

VMSC - Voice Mail Domain (VMD) Configuration
Removing a Voice Mail Domain
This topic describes how to remove a voice mail domain.
Important: Removing a voice mail domain can have serious repercussions for your
Modular Messaging system. If you are using an Avaya Message Store
Server (MSS), you can only have one voice mail domain. This is set up at
the time of installation. You should not use this command to try to remove
it.
Procedure 1: Removing a Voice Mail Domain
1. In the Voice Mail System Configuration window, select a voice mail
domain.
2. Click the Edit > Remove Voice Mail Domain menu or use the right-click
menu. The system prompts you to confirm this action.
3. When you click OK, you are prompted with the Connect to Message
Application Server window.
4. Enter the name of an the MAS server which uses a peer message store
server in the site which contains the VMD you wish to remove. You can
use the Browse button, if necessary.
5. Click OK. The voice mail domain is then removed from the Voice Mail
System Configuration tree.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
3–12 MAS Administration Guide
February 2007