Administration Guide - Avaya Support

VMSC - Voice Mail Domain (VMD) Configuration
Call Me Dialog Box
Note: For a detailed overview of voice mail domain configuration in the Voice Mail
System Configuration (VMSC) application, see Overview of VMD
Configuration in VMSC on page 3-3.
This topic describes how to use the Call Me dialog box to configure Call Me for a voice
mail domain.
With Call Me, subscribers can configure the system to call them, at one or more
designated numbers, each time they receive a message that meets certain criteria. The
subscriber can then log on to the TUI in order to review the message.
You can use the Call Me dialog box to enable the Call Me feature for the voice mail
domain. You can specify the MAS on which the MM Call Me Server service is
installed. You can also configure concurrency, interval and retry settings.
Notes:
! When the message store server is offline and Offline Access to
call-answered messages is configured, the Call Me feature does not
operate unless the MM Mailbox Monitor service is still online and the
MM Call Me Server service is able to contact another MAS in the voice
mail domain. For more information about Offline Access, see
Understanding Offline Access on page 3-129.
! You can use the Voice Mail System Configuration application’s Call
Me dialog box to configure the Call Me feature for the entire system.
Individual settings can be configured for each subscriber:
— Subscribers set up their own rules for using Call Me in
Subscriber Options. For more information, see the Avaya
Modular Messaging Subscriber Options Guide.
! For more information on Call Me, see the Avaya Modular Messaging
Concepts and Planning Guide.
Launching the Screen
1. In the Voice Mail System Configuration window, click the voice mail
domain.
2. Double-click Call Me. The system displays the Call Me dialog box for
the selected VMD, with the General tab active.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
3–44 MAS Administration Guide
February 2007