Administration Guide - Avaya Support

VMSC - Voice Mail Domain (VMD) Configuration
Serviceability - General Tab
Use the Serviceability dialog box, General tab to configure the ability of the MAS to
generate logs and notifications related to system errors and alarms. These notifications
are sent out using either INADS or SNMP traps to a network management server. You
can also control voice port service on the MAS.
Launching the Screen
1. In the Voice Mail System Configuration window, click the voice mail
domain.
2. Double-click Serviceability. The system displays the Serviceability
dialog box for the selected VMD, with the General tab active.
Configuring the Screen Controls
! Send alarms using Select whether you want to send alarms using None,
SNMP or INADS.
— None (Default) Select so that no alarm notifications are sent out.
You can still, however, view alarm logs on the MAS.
Note: These fields in the tab are then grayed out: Suppress alarm
notifications, Send notifications when all alarms are
cleared, Send alarm at this level or higher, and Product
identifier.
— SNMP Select to send Alarm traps to a network management station
using SNMP.
Notes:
! It is your responsibility to provide and provision your SNMP
network management station and configure it to receive the
traps from the MAS
! If you select this option, you should configure the SNMP tab.
See Serviceability - SNMP Tab on page 3-140.
— INADS Select to use the Avaya Initialization and Administration
System (INADS) tool to send alarm notifications to an alarm
collection server for analysis and corrective action.
Note: You must also configure the individual MASs for INADS. See
MAS - Serviceability Dialog Box on page 4-59.
! Suppress alarm notifications (Default Off) Select to temporarily suppress
alarm notifications.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
February 2007 MAS Administration Guide
3–137