Administration Guide - Avaya Support

VMSC - Messaging Application Server (MAS) Configuration
— Secondary Id Enter the second part of the PBX integration
identifier, known as the message desk number (MD), for serial
integration only. You can enter up to 10 characters and digits
(including & * # and ,). This field is blank by default.
Note: This field is applicable to DMI-4 and RS-232 integrations only.
Leave this field blank for C-LAN and inband integrations.
! Tone File Path (Available only if your system uses Brooktrout boards.)
Enter the location of the tone file, accucall.ton. The location of the tone
file is specified at installation. The default is C:\Rht\.
Note: If you are administering the voice mail system remotely and Voice
Mail System Configuration is not running on the MAS, the
Browse button is not available.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
4–16 MAS Administration Guide
February 2007