Administration Guide - Avaya Support

VMSC - Messaging Application Server (MAS) Configuration
MAS - Port Groups - General Tab
Use the Port Groups dialog box, General tab to create port groups and specify which
ports are members of each group. You can then configure each port group to be able to
receive incoming calls to the MAS and/or send outgoing calls.
Note: All port groups are be created in the General tab but then some are
configured in the Usage tab and others via the PBX Integration dialog box.
Others have no additional configuration but must be given a specific name.
See Rules for Creating Port Groups on page 4-24.
Launching the Screen
1. In the Voice Mail System Configuration window, click the voice mail
domain.
2. Click Message Application Servers.
3. Click on the MAS you want to configure.
4. Double-click Port Groups. The system displays the Port Groups dialog
box for the selected MAS, with the General tab active.
Configuring the Screen Controls
! Port Group Select from the drop-down list the port group that you want to
configure. The default is Default Group.
You can then use the other fields to configure the settings for this group.
! Port Group Members Lists the ports available on the current MAS. All
ports are selected by default, when the system is installed. Ports installed
after installation are not automatically included in a port group. You must
add these ports to a port group for use by the MAS.
Note: Ports referenced in the port group that no longer exist are marked
with an exclamation mark (!).
— Select a port to add it to the selected port group. Clear a port’s check
box to remove it from the selected port group.
! Port Group Usage
— Incoming Select this to permit the port group to receive incoming
calls to the MAS. By default, this check box is selected.
— Outgoing Select this to permit the port group to send outgoing calls
from the MAS. By default, this check box is selected.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
4–26 MAS Administration Guide
February 2007