Administration Guide - Avaya Support

VMSC - Voice Mail Domain (VMD) Configuration
PBX Configuration - Transfer/Outcall Tab (IP SIP)
Use the PBX Configuration dialog box, Transfer/Outcall tab to configure call transfer
properties for a voice mail domain.
Launching the Screen
1. In the Voice Mail System Configuration window, click the voice mail
domain (VMD).
2. Double-click PBXs. The system expands the node to show all available
types of PBX.
3. Double-click the IP SIP PBX. The system displays the PBX
Configuration dialog box for the selected VMD, with the General tab
active.
4. Click the Transfer/Outcall tab.
Configuring the Screen Controls
! Transfer Mode Select the mode to be used.
— Full The system listens for busy, invalid number, no answer, and
connect signals.
— Partial The system listens for busy and invalid number signals.
Note: This should not be used for call transfers.
— Blind (Default) No call progress analysis takes place.
Avaya Modular Messaging Release 3.1 with the Avaya MSS
February 2007 MAS Administration Guide
3–113