PDF user manual for CopperEdge 150

10. Set the DSL port (1.4.13) for the maximum number ofvoice channels. In this case, the IAD is capable of amaximum of eight channels. You can setJitterSpeedTradeoff on the CE150 for values other thanFullSpeedDataOnly, which is the default. Currently,the most appropriate setting for ports with a voice VCon them is MinJitterAndSpeed.CRAFT> set cminterfaceoptions [1.4.13]maxvoicechannels=8 jitterspeedtradeoff=minjitterandspeedWhen you perform a get, you will see this table:CRAFT> get cminterfaceoptions [1.4.13]Group: cmInterfaceOptionsTableInstance: [1.4.13.0]PII = 1.4.13.0VoiceGatewayType = NoneVoiceGatewayIpAddr = 0.0.0.0MaxVoiceChannels = 8JitterSpeedTradeoff = MinJitterAndSpeedJitterControlStatus = UncontrolledRowStatus= ActiveVoiceGatewayTypeId = 111. Set the VC for voice for DHCP. You are configuring theCE150 so that it, not an upstream DHCP server, candynamically assign an IP address to the IAD on thevoice VC.CRAFT> set cmdhcp [1.4.13.22] ipaddress=10.0.21.2netmask=255.255.255.255 function=dhcprespondWhen you perform a get, you will see this table:CRAFT> get cmdhcp [1.4.13.22]Group: cmDHCPTableInstance: [1.4.13.22]PII = 1.4.13.22RowStatus= ActiveIpAddress = 10.0.21.2NetMask = 255.255.255.0DefaultRouter = 0.0.0.0DNSServer = 0.0.0.0Function= DHCPRespondServerIPAddr = 0.0.0.0CircuitID= CRAFT-1.4.13.22&RSSHU(GJH,QVWDOODWLRQDQG2SHUDWLQJ*XLGH