PDF user manual for CopperEdge 150

You can enter multiple Get commands on the same lineby separating them with a semicolon, as in the followingexample:CRAFT> get cmiface [1.4.24]; get iftable [1.2.1.109]Any of the CopperCraft object names can be truncated up to thepoint of its shortest unique character string. For example, inthe sample Set command above, cmIface could be abbreviatedto cmif, and ifTable could be abbreviated to ifta.Some object names may also be entered using a shorter alias.Alias strings that differ from the object name, and that consistof something other than a truncated version of the name, areshown in the MIB-definition tables in the CopperEdge 150 CopperCraftReference and MIB Definitions manual.Whenever you assign IP addresses or subnet masks for theCE150, accuracy is essential; always issue a Get command toverify the entry when you are done. The CE150 will report anerror if you try to assign the same IP address to more than oneof its interfaces, but it does not currently report an error if twoIP addresses for the same subnet are assigned to separate interfaces.&RSSHU(GJH,QVWDOODWLRQDQG2SHUDWLQJ*XLGH