PDF user manual for CopperEdge 150

,31HWPRGHOWith this netmodel, the CE150 is able to route both inboundand outbound packets according to the IP address of their originationand destination devices. In the full IP netmodel (andalso the IP policy variation), subscriber links appear as wideareaextensions of a remote LAN.SpringfieldFred’s Fly-Fishing Factory(World Headquarters: 119 Elm Street)192.181.113.101DSL LinksWiring ClosetPublicNetwork212.119.1.14202.206.38.94196.200.104.1219.166.0.114DallasDistributorSeattleSupplierBangkokSupplierChicagoBanking House192.181.113.102IP Network ModelFull IP RoutingThe IP netmodel with full IP forwarding is one that most usersknow well. The NSP Central Office serves as a gateway to thenet, and individual message packets are exchanged and routedover the public network based on their destination IP address.The diagram above describes the model.1. Set the IP address, and other required parameters foreach connected CPE. Use the PII to designate theinterface to be configured.CRAFT> set cmiface [1.4.1] netmodel=ipipaddr=192.181.113.101 netmask=255.255.255.0encapsulationtype=rfc1483Set SuccessfulCRAFT> get cmiface [1.4.1]Group: cmIfaceTableInstance: [1.2.1.0]PII = 1.2.1.0IfIndex = 1.2.1.0Name = ""GroupName = ""AdditionalInfo = ""NetModel= IPIpAddr = 192.181.113.101NetMask = 255.255.255.0MacAddr= 0.80.50.1.b3.caBurnedInMacAddr = 0.80.50.1.b3.caFarEndAddr = 0.0.0.0DestPII = 0.0.0.0&KDSWHU$GYDQFHG&RQILJXUDWLRQ