PDF user manual for CopperEdge 150

• CPE-IDSL• Netopia-SDSL• CPE-T1Support ClassesThese classes identify resources that are supporting entities inthe system.• Support• PowerModule• FanModule/RJVAll events that occur on the CE150 are captured in three locations:• The Event Log contains all monitored events, whether amajor alarm or a notification.• The Alarm Table contains all alarms.• The Audit Log contains a record of attribute changes: theexact command entered to effect each change, and the IPaddress and name of the operator originating thecommand.Event LogAs events occur, the information is logged, and can be viewedin real time or captured to a file. The CE150 maintains a runningrecord of the most recent 1,000 events since the systemwas last reset.To view the Event Log in real time, connect to the system eitherdirectly or through Telnet and enter the command, elog. In thismode, events are displayed on the screen as they occur. Youcan also capture the information by logging your Telnet sessionand saving it for later analysis. To exit the elog function, pressEsc.CRAFT> elog2000/12/03-09:36:32 LoginFailcmActiveSessionTable IpAddress = 10.254.8.202cmTrapEventTable Text = admin, FTPcmTrapEventTable Type = LoginFailedcmTrapEventTable ObjectClass = OperatorcmTrapEventTable ClassId = 1.2.0.0cmTrapEventTable SeqNum = 67cmTrapEventTable TimeTag = 2000/12/03-09:36:32cmTrapEventTable Severity = Information2000/12/03-09:37:42 LoginSucceedcmActiveSessionTable IpAddress = 10.64.20.190cmTrapEventTable Text = ce200, TelnetcmTrapEventTable Type = LoginSucceededcmTrapEventTable ObjectClass = OperatorcmTrapEventTable ClassId = 1.2.0.0cmTrapEventTable SeqNum = 68&RSSHU(GJH,QVWDOODWLRQDQG2SHUDWLQJ*XLGH