PDF user manual for CopperEdge 150

System Control ModulePacket CommNetworkDS 3 FRAME DS 3 FRAMESYSTEM SYSTEMCONTROL CONTROLMODULE MODULESTATUSNETWORKMODEMDIAGNOSTICDIAGNOSTICProcessorRunningSpareCEInternalDataRXDDCDSpareEthernetPowerTXDDTRSystem Control Module-3Transmit/Receive DataData Link IntegrityDS 3 FRAME DS 3 FRAMESYSTEM SYSTEMCONTROL CONTROLMODULE MODULESTATUSSTATUSNET 1 NET 2NETWORKDIAGCRAFTMODEMRESETCEInternalDataProcessorRunningEthernet 2SpareEthernet 1PowerSystem Control Module LEDs5. If the System Control Module is connected to anEthernet network, the module will synchronize andnegotiate its speed with the network. The Ethernet LEDwill turn green if the network is a 10BASE-T (10 Mbps)system and red if it is a 100BASE-T (100 Mbps) system.The CE Internal Data LED indicates data activityinternal to the CE150 itself. The state of this LED doesnot correspond to the status of the system. At any time,the Internal Data LED may be off, blinking, pulsing, orsolidly greenOn the System Control Module panel, the Network andPacket Comm LEDs beside the modem port indicate&KDSWHU,QVWDOODWLRQ