PDF user manual for CopperEdge 150

+',$1HWPRGHOWith this netmodel, the CE150 is able to provide economical IPaddressing for hosts. You can map all data VCs on differentDSL ports to a single data VC on a WAN port. You can also mapall voice VCs on different DSL ports to a single voice VC on aWAN port. HDIA, unlike VWAN or CopperVPN in their aggregatemode, permits peer-to-peer communications between DSL VCs.Specify base IP addresses and address ranges (or net masks) forvoice and data subnets when you are configuring the circuitson WAN ports. Also specify base IP addresses and address ranges(or net masks) for IADs and hosts when you are configuringcircuits on DSL ports. For more detailed instructions, see CopperEdge150 CopperCraft Reference and MIB Definitions manual.Here are examples of the configurations for the data and voiceVCs on both the DSL and WAN interfaces.CRAFT> set cmiface [1.2.1.20] netmodel=hdia ipaddr=10.0.20.0netmask=255.255.255.192 encapsulationtype=rfc1483farendaddr=10.0.20.1CRAFT> set cmiface [1.2.1.21] netmodel=hdia ipaddr=10.0.21.0netmask=255.255.255.192 encapsulationtype=rfc1483farendaddr=10.0.21.1CRAFT> set cmiface [1.5.13] netmodel=hdia ipaddr=10.0.20.2netmask=255.255.255.255 destpii=1.2.1.20encapsulationtype=rfc1483CRAFT> set cmiface [1.5.13.22] netmodel=hdiaipaddr=10.0.21.2 netmask=255.255.255.255 destpii=1.2.1.21encapsulationtype=ip-1490$SSHQGL[%FP,IDFH&RQILJXUDWLRQ