PDF user manual for CopperEdge 150

226 Transfer complete14509 bytes sent in 0.10 seconds 8. Upgrade the System subdirectory:a) On the local machine only, change to the Systemsubdirectory:ftp> lcd ../systemLocal directory now C:\newce200\systemb) On the CE150, change to the System subdirectoryin the ce200- directory. It contains the Config filethat you saved at the beginning of this process:ftp> cd /ce200-/system250 Changed directory to “P:/ce200-/system”c) Copy the Config file:ftp> get config.tgz or get config.txt200 Port set okay150 Opening BINARY mode data connection#226 Transfer complete3218 bytes received in 0.17 seconds d) Return to the System subdirectory in the ce200budirectory:ftp> cd /ce200bu/system250 Changed directory to “P:/ce200bu/system”e) Delete the existing Config file in the ce200budirectory:ftp> del config.tgz or del config.txt250 Command accepted.f) Paste the Config file that you copied in step c:ftp> put config.tgz or put config.txt200 Port set okay150 Opening BINARY mode data connection#226 Transfer complete3218 bytes sent in 0.17 seconds cd /250 Changed directory to “P:/”5HQDPHWKH'LUHFWRU\&(WKH1HZ6RIWZDUHFrom the CE150 root directory, rename the newly rebuiltce200bu directory to the default name for the CE150 software(ce200):ftp> rename ce200bu ce200350 Accepted source filename. Ready for destination name354 Rename done.5HVWDUWWKH&(WR,PSOHPHQWWKH1HZ6RIWZDUH1. Exit the FTP session:&RSSHU(GJH,QVWDOODWLRQDQG2SHUDWLQJ*XLGH