PDF user manual for CopperEdge 150

5. Select a log type by entering either the text or the bitnumber for the text.CRAFT> set cmcpeiad [cpe:1.5.2] logtype=dhcpORCRAFT> set cmcpeiad [cpe:1.5.2] logtype=4Set Successful6. Specify the message levels to be logged by enteringeither the text or the bit numbers for the text.CRAFT> set cmcpeiad [cpe:1.5.2] loglevel=0+1+2+ORCRAFT> set cmcpeiad [cpe:1.5.2]loglevel=info+error+detail+otherSet Successful7. (Optional) You can change the timer for loggingmessages (for example, from 30 minutes to 10minutes):CRAFT> set cmcpeiad [cpe:1.5.2] logduration=10Set Successful8. For this example, we can generate some messages to belogged by changing the link’s administrative state toDown and then back to Up. This forces a resend of theDHCP request, causing messages to be logged.CRAFT> set iftable [1.5.2] admin=downSet SuccessfulCRAFT> set iftable [1.5.2] admin=upSet Successful9. Check the IAD table and note that the TotalMsgsLoggedobject has changed from 0 to 5.CRAFT> geta cmcpeiadIndex CurrentIpAddr CurrentCAIpAddr SavedIpAddrSavedCAIpAddr NumVoicePorts NumConnections CommandTOSByte LogAction LogType LogLevelLogDuration TotalMsgsLogged Trace1Mask Trace2MaskInstance: [CPE:1.13.2]CPE:1.13.2 10.10.1.5 10.10.1.1 10.10.1.510.10.1.1 8 16 None10 StartDebug 4 0+1+2+330 5 0 0To see more details:CRAFT> get cmcpeiad [cpe:1.5.2]Group: cmCpeIADTableInstance: [CPE:1.5.2]Index= CPE:1.5.2CurrentIpAddr = 10.10.1.5CurrentCAIpAddr = 10.10.1.1SavedIpAddr = 10.10.1.5SavedCAIpAddr = 10.10.1.1NumVoicePorts = 8NumConnections = 16Command= NoneTOSByte = 10LogAction= StartDebugLogTypeLogLevelLogDuration = 30TotalMsgsLogged = 5Trace1Mask = 0Trace2Mask = 0= DHCP(4)= INFO(0)+ERROR(1)+DETAIL(2)+OTHER(3)&KDSWHU7URXEOHVKRRWLQJ