PDF user manual for CopperEdge 150

6\VWHP&RQWURO0RGXOHV• SCM-1 and SCM-2:⇒ Intel Pentium processor (P54C)⇒ Up to 200 MHz internal clock, 66 MHz front side bus(FSB)⇒ Up to 512 Kbytes of secondary cache (L2 cache)⇒ 32 Mbytes DRAM, 66 MHz⇒ 8 MBytes of on-board flash memory⇒ One 10Base-T/100Base-TX Ethernet port with an RJ-45 connector⇒ Two DB9 male serial ports (Craft and Diagnostic) withEIA/TIA-232 Serial Interface connectors⇒ 33,600 Kbps analog modem with error correction anddata compression support• SCM-3:⇒ Intel Pentium III processor (EMC2)⇒ 500 MHz internal clock, 100 MHz front side bus (FSB)⇒ 256 Kbytes of secondary cache (L2 cache)⇒ 128 Mbytes DRAM, 100 MHz⇒ 64 MBytes of on-board flash memory through a CompactFlashtype 1 module⇒ Two 10Base-T/100Base-TX Ethernet ports with RJ-45connectors (the second port is not supported in thisrelease)⇒ Two 16C550 PC-Compatible serial ports (Craft andDiagnostic) with RJ-45 connectors⇒ 33,600 Kbps analog modem with error correction anddata compression support⇒ Pinhole reset switch⇒ For optimal system performance, we recommend youuse the Buffer Control Module 2 with the SCM-3&RSSHU(GJH,QVWDOODWLRQDQG2SHUDWLQJ*XLGH