PDF user manual for CopperEdge 150

6DYH&RQILJXUDWLRQ)DLOXUHIf the system configuration is not successfully saved when youlog out of the CE150, the following message is displayed andthe logout process is stopped:CE configuration has been changed.Save the configuration?(Y / y)>y.....CE configuration save failed.To see information about the failure, look for the ConfigWrite-Failed event in the event log (it will be at or near the end of theevent log).CRAFT> elog2000/10/03-14:37:03 ConfigWriteFailed.cmSystem ConfigFileName = config.tgzcmTrapEventTable Type = ConfigWriteFailedcmTrapEventTable ObjectClass = SystemcmTrapEventTable ClassId = 1.0.0.0cmTrapEventTable SeqNum = 11cmTrapEventTable TimeTag = 2000/10/03-14:37:03cmTrapEventTable Severity = InformationTo see the entire description of the event, find the instancenumber the ConfigWriteFailed event in the cmTrapEvent group:CRAFT> geta cmtrapeventSeqNum Type ObjectClass ClassIdProbableCause Severity TimeTag TextInstance: [11]11 ConfigWriteFailed System 1.0.0.00 Information 2000/10/02-10:22:23 Unable toTo view the full description in the cmTrapEvent group for thatinstance:CRAFT> geta cmtrapevent [11]Group: cmTrapEventTableInstance: [11]SeqNum = 11Type= ConfigWriteFailedObjectClass= SystemClassId = 1.0.0.0ProbableCause = 0Severity= InformationTimeTag = 2000/10/02-10:22:23Text= Unable to open the fileSee Appendix C, Events and Alarms, for more informationabout the ConfigWriteFailed event.&RSSHU(GJH,QVWDOODWLRQDQG2SHUDWLQJ*XLGH