PDF user manual for CopperEdge 150

5. Perform a set for the default IP route leading from theDSL ports to the WAN VC and, alternatively, from theVC to the DSL ports. The IP netmodel should workwithout a default IP route, however, since the CE150acts as a router for the traffic going between the DSLports (VCs) and the WAN ports (VCs).CRAFT> set iproute [0.0.0.0] nexthop=192.168.20.1type=directPerform a Get and look at the table:CRAFT> get iproute [0.0.0.0]Group: ipRouteTableInstance: [0.0.0.0]Dest = 0.0.0.0IfIndex = 1.2.1.80Metric1 = 1Metric2 = -1Metric3 = -1Metric4 = -1NextHop = 192.168.20.2Type= DirectProto= netmgmtAge = 755624Mask = 0.0.0.0Metric5 = -1Info = 0.010.10.1.2set iproute10.10.1.1 192.168.20.2HOST1HOST210.10.1.3NoTablesCPEBridgeFullIPDSLAM192.168.20.1RouteTablesTelcoRouterVPI=0VCI=32VPI=1VCI=32IP Netmodel—Default Route&KDSWHU$'6/*OLWHDQG*GPW