Transportation Management with SAP LES

Wave Picks 7.5
3. Because you will always use the same selection criteria in most cases, saving
your selection fields and contents in a variation is recommended. See Section
5.3.2 for information on the creation and maintenance of variations. Enter your
variants and correct you selection parameters (if necessary), or enter them manually
in this screen. Start the monitor, and you see the results of your selection
as a screen list (see Figure 7.41). You can change the layout of the list to meet
your needs. See Section 5.3.2 for information on how to change the layout.
Figure 7.41 Results of Your Selection of the Delivery Documents to Pick to Create a Group
4. Now select the delivery documents to pick by placing a checkmark at the beginning
of each row. Once you have checked all of the documents, select Subsequent
Function • Group • Wave Pick from the menu.
5. A pop-up is displayed (see Figure 7.42). You must enter a description and the
warehouse number in the pop-up.
Figure 7.42 Pop-up to Create a Wave Pick (Group)
6. Press Enter. The system tells you which number was used to create the group
(wave pick).
Personal Copy for Tina Mastrup, user id 9f19c686-d5e1-4016-94fd-ebc72e1b8f7e
277