Transportation Management with SAP LES

Printer Determination 15.4
Figure 15.7 Display of the CRM Bill of Lading from the Spool File
If you want to repeat an output (for printing, this means to reprint it, and for EDI,
to resend it), select the output type in question in the overview screen (see Figure
15.5). Click on the button. The output type selected is recreated. For the
second output type, the same procedure applies as for the first one.
You can avoid manual input by working with activity profiles. Depending on the
status set, you can automatically print your output or send EDI output. Activity
profiles are described in greater detail in Section 14.2.
You now know how you can get to output control functions in shipment documents.
For further details on handling units refer to Chapter 10, Shipping Papers
and Documents.
15.4 Printer Determination
Shipping documents are not always printed centrally at one location; in many
cases, they are printed directly at the location of the person responsible or at the
transportation planning point’s shared printer. If the SAP standard is not sufficient
for your purposes, you can ultimately use SAP software’s user exits.
Assign your printer’s name to your transportation planning point. Select the function
in Customizing. Initially, a folder is displayed in which you can set the print
parameters for your shipment. Select the Transport (V7) folder. The system then
Personal Copy for Tina Mastrup, user id 9f19c686-d5e1-4016-94fd-ebc72e1b8f7e
509