View/Open - DSpace - Tor Vergata - Università degli Studi di Roma ...

Riferimenti bibliografici
[20] Kim, C. H. (2006) Durability improvement method for plastic gears. Tribology International, Vol. 39, p.
1454-1461 .
[21] Bermudez, M.D., Carrion-Vilches, F.J., Martinez-Mateo, I. e Martinez-Nicolas, G. (2000) Comparative
study of the tribological properties of polyamide 6 filled with molybdenum disulfide and liquid
crystalline additives. Tribological Properties of Polyamide, Vol. 6, p. 2426-2432.
[22] Eiss, N.S.J. e Hanchi, J. (1996) Tribological behavior of polyetheretherketone, a thermotropic liquid
crystalline polymer and in situ composites based on their blends under dry sliding conditions at
elevated temperatures. Wear, Vol. 200, p. 105-121.
[23] Stuart, B.H. (1998) Tribological studies of poly(ether ether ketone) blends. Tribology International, Vol.
31, p. 647-651.
[24] Zhang, M.Q., Zai, P.L. e Friedrich, K. (1997) Thermal analysis of the wear debris of
polyetheretherketone. Tribology International, Vol. 30, p. 103-111.
[25] Long, C.-G. e Wang, X.-Y. (2004) Mechanical properties and tribology performance of the Ekonol-PEEK
composite. Journal of Reinforced Plastics and Composites, Vol. 23, p. 1575-1582.
[26] Davim, J.P. e Cardoso, R. (2006) Tribological behaviour of the composite PEEK-CF30 at dry sliding
against steel using statistical techniques. Materials & Design, Vol. 27, p. 338-342.
[27] LiuJie, X., Davim, J.P. e Cardoso, R. (2007) Prediction on tribological behaviour of composite PEEK-CF30
using artificial neural networks. Journal of Materials Processing Technology, Vol. 189, p. 374-378.
[28] Sinmazçelik, T. e Yilmaz, T. (2007) Thermal aging effects on mechanical and tribological performance
of PEEK and short fiber reinforced PEEK composites. Materials & Design, Vol. 28, p. 641-648.
[29] Yamamoto, Y. e Takashima, T. (2002) Friction and wear of water lubricated PEEK and PPS sliding
contacts. Wear, Vol. 253, p. 820-826.
[30] Yamamoto, Y. e Hashimoto, M. (2004) Friction and wear of water lubricated PEEK and PPS sliding
contacts. Part 2. Composites with carbon or glass fibre. Wear, Vol. 257, p. 181-189.
[31] Jia, J., Chen, J., Zhiu, H. e Hu, L. (2004) Comparative study on tribological behaviors of
polyetheretherketone composite reinforced with carbon fiber and polytetrafluoroethylene under
water-lubricated and dry-sliding against stainless steel. Tribology Letters, Vol. 17, p. 231-238.
[32] Jacobs, O., Jaskulka, R., Yan, C. e Wu, W. (2005) On the effect of counterface material and aqueous
environment on the sliding wear of various PEEK compounds. Tribology Letters, Vol. 18, p. 359-372.
[33] Unal, H. e Mimaroglu, A. (2006) Friction and wear characteristics of PEEK and its composite under
water lubrication. Journal of Reinforced Plastics and Composites, Vol. 25, p. 1659-1667.
[34] Bijwe, J., Sen, S. e Ghosh, A. (2005) Influence of PTFE content in PEEK-PTFE blends on mechanical
properties and tribo-performance in various wear modes. Wear, Vol. 258, p. 1536-1542.
[35] Lal, B., Alam, S. e Mathur, G.N. (2006) Tribo-investigation on PTFE lubricated PEEK in harsh operating
conditions. Tribology Letters, Vol. 25, p. 71-77.
[36] Wang, Q.-H., Xu, J., Shen, W. e Xue, Q. (1997) The effect of nanometer SiC filler on the tribological
behavior of PEEK. Wear, Vol. 209, p. 316-321.
[37] Wang, Q.-H., Xue, Q.-J., Liu, W.-M. e Chen, J.-M. (2000) Effect of nanometer SiC filler on the
tribological behavior of PEEK under distilled water lubrication. Journal of Applied Polymer Science,
Vol. 78, p. 609-614.
[38] McCook, N.L., Hamilton, M.A., Burris, D.L. e Sawyer, W.G. (2007) Tribological results of PEEK
nanocomposites in dry sliding against 440C in various gas environments. Wear, Vol. 262, p. 1511-
1515.
282