II - DCE FEL ČVUT v Praze

Interference rejection, error limits
Crosstalk attenuation between
outputs
Operational limit (in total
temperature range, referred to
output range)
Basic error (operational limit at
25C, referred to output range)
Temperature error
(referred to output range)
Linearity error
(referred to output range)
Repeatability (in steady-state
condition at 25 C, referred to
output range)
Output ripple; range 0 to 50
kHz (referred to output range)
Interrupts, Diagnostics
130 dB
0.55 %
0.2 %
0.01 %/K
0.02 %
0.005 %
0.02 %
Interrupts
Diagnostic interrupt configurable
Diagnostic functions configurable
Group fault indication red LED (SF)
Channel fault indication red LED (F)
per channel
Diagnostic information
readout
possible
Monitoring for
Wire break yes
as of output value and > 0.1 mA
output voltage > 12 V
I/O Modules with Intrinsically-Safe Signals
C79000-G7076-C152-04
Safety data (refer to Certificate of Conformity in
Appendix A)
Type of protection to
EN 50020
[EEx ib] IIC
Maximum values of output
circuits (per channel)
U0 (no-load output
voltage)
max. 14 V
I0 (short-circuit current) max. 70 mA
P0 (load power) max. 440 mW
L0 (permissible external
inductance)
max. 6.6 m
C0 (permissible external
capacitance)
max. 850 nF
Um (error voltage) max. 60 V DC
30 V AC
Ta (permissible ambient
temperature)
max. 60C
Data for actuator selection
Output ranges (rated values)
Current from 0 to 20 mA
from 4 to 20 mA
Load impedance (in rated
range of output)
for current outputs
– resistive load
– inductive load
– capacitive load
1) Limitation by PTB-approval
When used in non-Ex area
– resistive load max. 500
– inductive load max. 15 mH
– capacitive load max. 3 F can be set as the load impedance.
SIMATIC S7 Ex Analog Modules
max. 500
max. 6.6 mH 1)
max. 850 nF 1)
Current output
No-load voltage max. 14 V
Destruction limit for externally
applied voltages / currents max. + 12 V / - 0.5V
Voltages
max. + 60 mA / - 1A
Current
Connection of actuators
for current output
2-wire connection possible
3-73