II - DCE FEL ČVUT v Praze

Preface
Electronic
manuals
Further support
Up-to-date
information
vi
You can also order the documentation as an electronic manual on CD-ROM.
The order number of the CD-ROM is: 6ES7 398-8RA00-8AA0
Should you have any further questions on using the products described which
are not answered in the manual, please contact the Siemens representative in
your area.
If you have any questions or remarks on the manual itself, please fill out the
questionnaire at the end of the manual and send it to the address shown on
the form. Please also enter your personal evaluation of the manual in the
questionnaire.
Siemens also offers a number of training courses to introduce you to the
SIMATIC S7 automation system. Please contact your regional training center
or the central training center in Nuremberg, Germany for details:
D-90327 Nuremberg, Tel. (+49) (911) 895 3154.
If you require the type file or the DDB file you can download these via
modem from the Interface Center in Fürth under the number
+49 (911) 737972, or you can order the files on diskette.
You can obtain up-to-date information on SIMATIC products from:
the Internet under http://www.ad.siemens.de/
In addition, the SIMATIC Customer Support team offers you up-to-date
information and downloads which you may find useful:
on the Internet under http://www.ad.siemens.de/simatic-cs
via the SIMATIC Customer Support Mailbox under the number
+49 (911) 895 - 71 00
To dial the mailbox, you require a modem with a voltage range up to V.34
(28.8 Kbps) and parameters set as follows: 8, N, 1, ANSI, or you can dial
in via ISDN (x.75, 64 KBit).
You call the SIMATIC Customer Support Hotline on +49 (911) 895 – 70 00
or send a fax to +49 (911) 895 – 70 02. You can also submit inquiries by
electronic mail via the Internet or by using the mailbox mentioned above.
I/O Modules with Intrinsically-Safe Signals
C79000-G7076-C152-04